ACTi MPEG-4 Indoor IR IP Dome Camera

IR Range 50 Feet

Supports up to Full D1 resolution, w/ two-way audio, 420 TV line, Sony SuperHAD CCD Module, f4.3mm/ F2.0, PoE, Power Adapter, ACTi Streaming Activator S/W

Product Details

1/3' Sony SuperHAD image sensor
Build in 4.3 mm fixed lens
Build in IR LED and CDS sensor
Backlight Compensation, Auto Iris Control, Auto White Balance supported
Free rotating ball joint mechanical design allows coverage of all angles
MPEG-4 SP Compression
CIF up to Full D1 resolution at 30/25 FPS
Two-way audio supported
Power over Ethernet (IEEE 802.3af) supported
1 year parts and labor warranty

Specifications

Image
Device	SONY SuperHAD CCD
Size	1/3 inch
Effective Pixels	537 x 505 (NTSC); 537 x 597 (PAL)
Horizontal Resolution	420 TVL
Min. Scene Illumination
Color	0Lux (w/ IR) IR LED ON at 4Lux / Controlled by a CDS sensor
IR Sensitivity	from 700 nm to 1100 nm
IR LED	IR LED x24 (850 nm)
CDS Sensor	Yes
IR Working Distance	10 ~ 15 M (30 IRE)
Lens
Focal Length	f4.3 mm / F2.0
Viewing Angle	63 Degrees (Horizontal)
Camera Angle Adjustment
X (Panning)	0 ~ 360 Degrees
Y (Tilting)	0 ~ 180 Degrees
Z (Rotating)	0 ~ 360 Degrees
Synchronization
Sync. System	Internal
Day/Night Functions
Mechanical IR Cut Filter	N/A
Functions
Motion Detection	Yes (3 windows)
Electronic shutter	1/60 ~ 1/100,000 sec. (NTSC) 1/50 ~ 1/100,000 sec. (PAL)
BLC	Automatic
AGC	Automatic
S/N Ratio
S/N Ratio	Better than 48 dB
Video Compression
Compression	MPEG-4 SP
Picture Resolution	Full D1 (720x480 in NTSC, 720x576 in PAL) VGA (640x480 in NTSC, 640x480 in PAL) CIF (352x240 in NTSC, 352x288 in PAL) QCIF (176x120 in NTSC, 176x144 in PAL)
Bit Rate	28 K ~ 3 M bps
Image Frame Rate	30fps at full D1 resolution (NTSC) 25fps at full D1 resolution (PAL)
Audio Input
Compression	8 kHz, Mono, PCM
Audio Line Input	Unbalanced, 1.4 Vp-p, 1Vrms, 3.5 mm Jack
Audio Output
Compression	8 kHz, Mono, PCM
Audio Line Output	Unbalanced, 1.4 Vp-p, 1Vrms, 3.5 mm Jack
Casing
Mount Types	Surface / Wall (option)
External I/O
Reset Button	Factory default
Network
Ethernet	Ethernet (10/100Base-T), RJ-45 connector
Protocol	TCP, UDP, IP, HTTP, DHCP, PPPoE, RTP, RTSP
Software
Web Browser	Microsoft Internet Explorer 6.0 or above
SDK	ActiveX control, C SDK
Security	Password protection: configured by the administrator
Operating
Temperature	-10C ~ 50C (14F ~ 122F)
Power
Power Requirement	PoE (IEEE802.3af) with Class 3 (ACM-3211)
Power Consumption	5.7 W (DC 12 V) w/ IR ON 7.0 W (PoE) w/ IR ON
Physical
Dimensions ( x L)	106.5 mm X 99.8 mm (4.19' x 3.93')
Weight	320 g (0.7 lb)

*Not Compatible with the Protech DVR's
Note: 802.3s working distance is 100 meters. PoE cameras are 802.3af Class 3 rated and can guarantee to receive power from 6.96 ~ 12.96 Watts. 100 meters is guaranteed if the cameras are connected to 802.3af Class 3 rated PoE injector, mid-span or network switch. If you need to extend the run above 100 meters, what you need to do is to use a normal network switch first and add one every 100 meters; use a PoE network switch finally within 100 meters of the IP cameras.

Drivers & Manuals

Photos & Videos

Accessories

Configuration Options

ACM-3211N
Only:

$451.25