ACTi Video Server, Single Channel

Product Details

Single Channel
Hybrid analog and Ethernet video output
MPEG-4 compression
CIF up to Full D1 resolution at 30/25 FPS
Hardware Motion Detection, Digital Input/Output
Fail-over network protection and QoS enabled (L3) video streaming
Multi-stream with variable frame rate in the same compression
Optional rackmount kit available

Specifications

Transmit analog image into digital data with ultra high resolution

The SED-2120 is a high resolution, Ethernet (LAN and WAN) ready digital video transmission device. It is specially designed to meet the increasing need for high quality, high reliability, real-time video streaming used in the field of surveillance and security.

The SED-2120 is based on Arm9 SoC, MPEG-4 ASP compliant compression technology to compress the video stream and transmit them via LAN and WAN. It supports automatic/manual frame rate control for concurrent video stream accessing in different bandwidth. The SED-2120 also provides RS-232 or RS-422 or RS-485 and digital I/O data transmission over Ethernet for product integrators or solution providers. With this system, users can build digital remote surveillance systems easily. SED-2120T model can support industry temperature from -30 to 70 ÂºC (-22 to 158ÂºF).

Video (Compression)
Compression	MPEG-4 ASP compliant compression
	Full D1 (720 x 480 in NTSC, 720 x 576 in PAL)
Resolution	CIF (352 x 240 in NTSC, 352 x 288 in PAL)
	QCIF (160 x 112 in NTSC, 176 x 144 in PAL)
Bit Rate	28 K ~ 3 M bps
Image Frame Rate	30 fps at full D1 resolution (NTSC)25 fps at full D1 resolution (PAL)
	25 fps at full D1 resolution (PAL)
Multi-stream	Up to 4 configurable frame rate/bit rate streams for preview and recording
Video Input
Composite Input	CVBS, 1.0Vp-p with 75 loading, BNC connector
Video Output
Composite Output	CVBS, 1.0Vp-p with 75 loading, BNC connector
Alarm
Input	2, TTL, terminal block
Output	2, TTL, terminal block
Remote Control
	RS-485: half duplex, terminal block
Serial Port	RS-422: full duplex, terminal block
	RS-232: full duplex, terminal block
External I/O
Reset Button	Factory default
LED	System status
Network
LAN Port	Ethernet (10/100Base-T), RJ-45 connector
WAN Port	Ethernet (10/100Base-T), RJ-45 connector
	TCP, UDP, IP, HTTP, DHCP, PPPoE, RTP,
Protocol	RTSP, FTP, SMTP, DNS, DDNS, NTP,
	ICMP, IGMP, ARP
Software
Web Browser	Microsoft Internet Explorer 6.0 or above
SDK	ACTi SDK-10000
	Pelco-P_type1, Pelco-P_type2, Pelco-D,
PTZ Protocol*	Dynacolor, Samsung, VCL, Videotrek,
	Kampro-V1, Kampro-V2
Security	Password protection : configured by the administrator
Operating
Temperature	5 C ~ 50 C (40 F ~ 122 F)
Power
Power Requirement	DC 12 V +/-10%
Power Consumption	7.5 W
Physical
Dimensions (WxHxD)	112 mm x 37.2 mm x 119 mm (4.41" x 1.46" x 4.68")
Weight	350 g (0.66 lb)
* These PTZ protocols are supported in ACTi NVR and Streaming Explorer.

Drivers & Manuals

Photos & Videos

Accessories

Configuration Options

SED-2120
Only:

$462.50